TRUMPET

 

PARTS

 

OILING VALVES

1. Unscrew the top valve cap and remove valve.

 

2. Apply valve oil to surface of the valve. Do not put oil in valve holes.

 

3. Re-insert valve in a twisting motion to ensure the valve chamber is lubricated.

 

4. The valve seat should click into place and the number on the valve should be facing the mouthpiece.

 

5. Screw in the valve cap and depress it a few times to make sure it is working correctly.

 

GREASING THE TUNING SLIDES

Apply tuning slide grease (available at music stores) to the two tuning slides as shown below. These two slides are only occasionally adjusted and need a thick grease to keep the joints from 'freezing' from corrosion.

 

OILING THE FINE TUNING SLIDES

The two slides shown below are adjustable during play (that's why they have finger rings), so they need oil to make them slide quicker and easier. Grease is too thick and slow for these slides, though beginners may prefer to use grease if they are not going to use finger sliders very often.

 

WATER KEYS

Water Key corks need to be checked every few months. If they begin to deteriorate, air will leak causing tuning and playing problems. Have them replaced when necessary.

 

CARE & MAINTENANCE TIPS

1. Move all the tuning slides in and out about half an inch every few days. This keeps     them from sticking

2. Always keep the Trumpet in its case. Leaving it lying around makes it subject to     accidental damage.

3. Do not keep other items in the case, even sheet music can put pressure on the     valves and cause them to stick.

4. Do not force the mouthpiece into the receiver, it may get jammed. If it does use a     proper mouthpiece puller to remove it.

5. Don't use metal polish on the Trumpet. The outside doesn't really need any cleaning,     if you need to clean the outside just use a dry cotton cloth or take it to a professional.

 

Tools for further cleaning and maintenance